Alpine Sub & Amp Package

from £419.00

DEKO
£30.09
per month
12 x payments + £83.80 deposit

We are now at our "Best Range" of car audio components in this series of car audio sub and amp packages.

  • Supply Only - Price £419.00
    Including Workshop Fitting - Price from £499.00

Take out the hassle by letting one of our highly trained technicians install your Alpine Sub & Amp Package for you.

Please note : Additional fitting components are usually required subject to the make and model of your vehicle which we can quote you for prior to the installation.

Contact us on 01924 201884 or email to book your appointment.

For this sub and amp package you get the very best that Alpine can offer.
You get the great Alpine SWR-10D4 Subwoofer and the Alpine PDX-M6 Mono Block Amplifier giving you the highest quality of bass, deep and punchy with loads of headroom.

PDX-M6 - Mono Power Density Digital Amplifier
Meet the New Amplifier Benchmark
The new Alpine PDX Series amplifiers are completely re-engineered for performance, sound quality, and reliability. The PDX series are for the true car audio enthusiast, all from a compact size. Consider the bar raised.
FEATURES
Install
Connectors: Quick Disconnect Terminals (Power Terminal and Speaker Terminals)
Terminal Layout: One-Sided
Mounting Design: Easy Stacking and Clean-look installation
General
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Thermal Protection
Low-battery Protection
Power Supply: Resonant Mode Power Supply
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: STAR Circuit
Current Protection: Auto Over-Current Protection
Power Indicator: Top Mounted Blue LED Power/Status Indicator
RCA Output: Non-Fading Pre-Amp Output
Crossover: Adjustable Low Pass
Pre-Amp Stage: Discrete
Final Outputs: MOSFET
Board Design: 6-Layer Glass Epoxy PC Board
Gain Control: Adjustable
Bass Control: Remote Bass Control (Sold Separately)

SWR-10D4 - 10′′ (25 cm) Type-R Subwoofer (4Ω + 4Ω)
These redesigned fifth-generation Type-R subwoofers include an abundance of enhanced features to achieve staggering power handing capabilities, cleaner output, deeper bass extension and ultra-responsive control than ever before.
FEATURES
Diaphram
Material: Oversized Hairline-Textured Mica Poly Dustcap w/
Kevlar Reinforced Pulp Paper Cone Body
Design: 2-Piece Parabolic
Surround
Material: Injected Molded Santoprene«
Design: High Amplitude Multi-Roll H.A.M.R Surround Design (Patent Pending)
Spider
Material: Conex«
Design: 10 Segment High-Roll Progressive Design
Voice Coil
Material: 180║C High Temp Wire on Sprial-Cut Aluminum Bobbin
Design: 4-Layer Dual Voice Coil
Motor Structure
Pole Geometry: FEA Optimized Design w/ Compound Radius Pole Geometry
Configuration: Radial Vented VC Heat Sink and Airflow Management System (Patent #7,634,101)
Frame
Material: Cast Aluminum
Design: Perimeter Vented Heat Transfer (Patent Pending), Integrated Shorting Sleeve and Airflow Management System
Terminals
Layout: One Sided
Design: Heavy Duty 8 gauge Push with Housing, Banana Plug Jumper
Tinsel Leads
Design: Reinforced Layer Spider Integration (Patent #6,810,988)
Gasket
Design: Concealed Mount Gasket System

RMS Power Ratings PDXM6
Per channel into 4 Ohms (@14.4V &
Per channel into 2 Ohms (@14.4V &
Sound Tuning
Crossover Variable, 50-400Hz (-24dB / oct ), (Variable, L.P.F Only, 1/2 ch)
Subsonic Filter OFF / 15Hz / 30Hz
Dimensions
Heat Sink (WxHxD) mm 257mm x 192mm x 50.8mm
General
Power Requirements 14.4V DC (11V to 16V)
Input Sensitivity Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
Cable size 25 mm▓ (BATT and GND), 4 mm▓ (Remote), Up to 10 mm▓ (Speaker)
Frequency Response 5 Hz - 400 kHz / 0dB ~ -3dB (Reference
Speaker Impedance 4 or 2 &
Signal to Noise CEA 2006 S/N Ratio (IHF A Weighted, Reference
SPECIFICATIONS SWR10D4
RMS Power Ratings
Per channel into 4 Ohms (@14.4V &
Per channel into 2 Ohms (@14.4V &
Sound Tuning
Crossover Variable, 50-400Hz (-24dB / oct ), (Variable, L.P.F Only, 1/2 ch)
Subsonic Filter OFF / 15Hz / 30Hz
Dimensions
Heat Sink (WxHxD) mm 257mm x 192mm x 50.8mm
General
Power Requirements 14.4V DC (11V to 16V)
Input Sensitivity Select Vol, 0.1V to 1.0V or 1.0V to 8.0V (For Rated Power)
Cable size 25 mm▓ (BATT and GND), 4 mm▓ (Remote), Up to 10 mm▓ (Speaker)
Frequency Response 5 Hz - 400 kHz / 0dB ~ -3dB (Reference
Speaker Impedance 4 or 2 &
Signal to Noise CEA 2006 S/N Ratio (IHF A Weighted, Reference

  Send Us Your Review of Alpine Sub & Amp Package

Contact RAM Mobile about Alpine Sub & Amp Package Installation