Audiotec Fischer BMW Amp and Speakers Complete Package
The BMW Car Audio Amplifier and Speaker System Improvement Package is suitable for all the following vehicles:
BMW 1 Series from 2004, including E81/82/87/88 plus the later F Series Models
BMW 3 Series from 2006, including E90/91/92/93 plus the later F Series Models
BMW 5 Series from 2004, including E60/61 plus the later F Series Models
BMW X5 Series
This complete package features the Audiotec Fischer 3 way speaker system with the twin 8" woofers replacing the standard 6" ones under the driver and passenger seats, the 2 x 4" mid range speakers replacing the standard BMW ones and the additional 2 x tweeters fitting on vehicles that have no tweeters. The new tweeter housings ordered for the factory fitted look on the back of the door mirror blanks (at extra cost) or of course replacing the existing factory fitted tweeters.
This package also includes the Match PP62DSP BMW Tuned 4 Channel Amplifier, for which we use the rear outputs to run the under seat woofers in low pass fully active, giving great bass response, and the front outputs to run the 4" mid-range and tweeters through the supplied passive crossovers giving amazing mid range and top end for clear dynamic sound, something that cannot be said in relation to the standard BMW supplied audio system.
The PP 62DSP provides everything an up-to-date Plug & Play amplifier needs: easy installation and maximum flexibility.
Its installation effortlessly takes place via Plug & Play cable harness which is included in delivery – no cable has to be cut or modified. At www.audiotec-fischer.com the huge online sound setup database provides the appropriate setup.
The MATCH Extension Card (MEC) slot makes it possible to expand the PP 62DSP’s functionality by inserting an optional MEC module - for example a Bluetooth® Audio Streaming module, an optical digital input or a High Resolution Audio USB soundcard. In addition the PP 62DSP offers the option of hooking up additional amplifiers using the two channel pre-amp output.
Sound enthusiasts get their money´s worth as well – thanks to the professional and user-friendly Audiotec Fischer DSP PC-Tool software it becomes amazingly easy to create individual sound setups. Furthermore the PP 62DSP is optionally configurable as a 6-channel amplifier with a total of 8 DSP channels. Due to the numerous adjustment options it leaves nothing to be desired.
The Audiotec Fischer Match BMW 8" woofers fit under the driver and passenger seats, and the 4" mid range speakers fit behind the existing grilles on the front doors, with the tweeters mounted into the original positions behind the door mirrors. And don't worry if your car doesn't have the tweeters as standard as we also supply the BMW mountings.
|Output power RMS / max.|
|- @ 4 Ohms 4 x 35 / 70 Watts (Font/Rear channels)|
|- @ 2 Ohms 4 x 50 / 100 Watts (Font/Rear channels)|
|- @ 1 Ohm -|
|- bridged @ 4 Ohms -|
|- bridged @ 2 Ohms -|
|- Subwoofer output @ 4 Ohms -|
|- Subwoofer output @ 2 Ohms 1 x 160 / 320 Watts (4 channels each 40 / 80 Watts)|
|Amplifier technology Class AB|
|Inputs 4 x Highlevel speaker input|
|1 x Remote In|
|Input sensitivity Highlevel 5 - 11 Volts|
|Input impedance RCA / Cinch -|
|Input impedance highlevel 13 Ohms|
|Outputs 8 x Speaker output|
|2 x RCA / Cinch|
|1 x Remote Out|
|Output voltage RCA / Cinch 3 Volts RMS|
|Frequency response 20 Hz - 22,000 Hz|
|DSP resolution 56 Bit|
|DSP power 172 MHz|
|Sampling rate 48 kHz|
|DSP type Audio signal processor|
|Signal converters A/D||BurrBrown|
|Signal-to-noise ratio digital input -|
|Signal-to-noise ratio analog input 103 dB (A-weighted)|
|Distortion (THD) < 0.01 %|
|Damping factor > 100|
|Operating voltage 10.5 Volts (max. 5 sec.down to 6 Volts)|
|Current draw 670 mA|
|Max. remote output current 500 mA|
|Fuse 1 x 20 A Maxi-fuse (APX)|
|Additional features Variable input sensitivity, fully stabilized internal power supply with start-/stop capability, 56 Bit digital signal processing, internal memory for two different sound setups, USB input, MATCH Extension Card slot, input for optional remote control, stereo line outputs with balanced output transformers (floating ground)|
|Dimensions (H x W x D) 44 x 185 x 139 mm /|
|1.73 x 7.28 x 5.47“|