Bassface SPL6C 6.5

£113.00

This is the SPL6C.2 with stiffer cones, higher power handling and better tweeter housing. V1 The V1 featured a basket that was popular because its easy to fit but we found that the cone was a little smaller than optimal for a six inch setup. And the wire was basic. V2 The V2 features a revised basket that makes a better fitment and increases the cone diameter by 10mm compared to the V1. Also we had high quality heavy gauge wire put in the box instead of the original thinner gauge.

  • Tech-One White Woven Composite Cone
  • Heavy Gauge Steel Basket
  • Massive Super High Density Ceramic Magnet
  • Multi Layer Aluminium Voice Coil
  • Aerospace Grade Rubber Surround Suspension
  • Highly Musical Silk Dome Tweeter
  • Fits Most Metric 16.5 Euromount and Imperial 6.5" Apertures
  • 3 Position Tweeter Level Switch -3db / 0db / +3db
  • Now featuring different baskets enabling a larger cone area for increased output and heavy gauge speaker wire packaged as standard. The SPL6C.2 component speakers are a tour de force of sound reproduction technology. With a full 40mm voice coil they are primed to deliver terrific mid bass response. Lightweight construction allows them to deliver finesse as well as power. A massive magnet structure might make it a little less easy to fit but the trade off is excellent transient response and better dynamics. The tweeters are pure silk domes which are outfitted with Neodymium magnets keeping the size down and the power capabilities right up. We use silk done tweeters throughout our whole range of speakers apart from the bullet tweeters because silk gives a more natural response than the harshness that can sometimes be present in plastic or mylar domes. This of course is more expensive but it has been paid for by not printing pretty pictures on our packing boxes and by not including printed instructions (instead get your up to the minute instruction pack at our website). This is just one example of how we have optimised our products to give you the best possible performance for you money which is something we feel very strongly about. Big motors, stiffer steel baskets, tweaks to the cone for increased stiffness and larger more powerful magnets are the key to the increased performance of the latest model. Detail adjustments such as tighter tolerances on crossover components ensures that we get the same high quality reproduction on every pair made and deliver consistency to the end user.

    Tweeter Data
    Recommended Cable PSC18.1
    Overall Depth (mm) 31
    Mounting Depth (mm) 16
    Front Protrusion From Mounting Plane (mm) 15
    Overall Diameter (mm) 59
    Installation Cutout Diameter (mm) 55
    System Maximum Power (Watts) (Using Pair Of Tweeters Not Necessarily Included) 200
    System RMS (Watts) (Using Pair Of Tweeters Not Necessarily Included) 100
    Frequency Response (Hz) 2800-23000
    Impedance (Ohm) 4
    Sensitivity (db/1Wm) 99
    Speaker Data
    Speaker Maximum Recommended Power (Watts) (One Speaker, Using Appropriate Crossover) 350
    Speaker Maximum Recommended Power RMS (Watts) (One Speaker, Using Appropriate Crossover) 175
    Overall Diameter With Lugs (mm) 165
    Overall Diameter With Grilles (mm) 165
    Overall Diameter (mm) 165
    Magnet Diameter (mm) (Including Magnet Protector Where Applicable) 105
    Installation Cutout Diameter (mm) 145
    Grille Depth (mm) 23
    Overall Depth (mm) 75
    Mounting Depth (mm) 65
    Front Protrusion From Mounting Plane (mm) 10
    System Frequency Response (Hz) (Indicative Of Usable Range But Not Suitability) 40-23000
    Impedance (Ohm) (Nominal) 4
    Sensitivity (db/1Wm) 96
    Recommended Cable PSC16.2
    Voice Coil Diameter (mm) 38

      Send Us Your Review of Bassface SPL6C 6.5

    Contact RAM Mobile about Bassface SPL6C 6.5 Installation