JL Audio 10" Bass Pack 1

from £299.00

JL Audio 10" Bass Pack

  • Supply Only - Price £299.00
    Including Workshop Fitting - Price from £349.00
    Including Location Fitting - Price from £399.00
  • JL Audio 10" Bass Pack
  • includes JL Audio JX250/CP110
  • Wiring kit
  • Take out the hassle by letting one of our highly trained technicians install your JL Audio 10" Bass Pack 1 for you.

    Please note : Additional fitting components are usually required subject to the make and model of your vehicle which we can quote you for prior to the installation.

    Contact us on 01924 201884 or email to book your appointment.

    JX250/1
    Monoblock Class A/B Subwoofer Amplifier, 250 W x 1 @ 2 Ω / 175 W x 1 @ 4 Ω - 14.4V
    This rugged and reliable Class A/B monoblock uses a robust MOSFET power supply design that delivers rock-solid bass performance at a very affordable price.
    Targeted specifically for subwoofer applications, the JX250/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote boost control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.

    CP110-WØv3
    Enclosed Subwoofer System with Single 10WØv3-4 Subwoofer Driver, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure
    This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.
    The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
    The ultra-versatile BassWedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
    This subwoofer system is shipped wired, loaded and ready to connect via a push-button terminal.
    Finish: Dark gray, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported BassWedge™" embroidered on the port mouth.
    Construction: MDF
    Recommended amplifier power: 75 - 300W
    Nominal Impedance: 4 Ω

    [JX250/1]
    @ 4 & 937; 175 W RMS x 1
    @ 3 & 937; 210 W RMS x 1
    @ 2 & 937; 250 W RMS x 1
    @ 1.5 & 937; N/A
    [CP110-WØv3]
    Continuous Power Handling (RMS) 300 W
    System Nominal Impedance 4 & 937;
    Enclosure Type Slot-ported
    Finish Gray carpet
    Grille Included No

      Send Us Your Review of JL Audio 10" Bass Pack 1

    Contact RAM Mobile about JL Audio 10" Bass Pack 1 Installation