Rainbow Beat 4 Amplifier

from £199.00

Rainbow Beat 4
Compact 4-channel, ideal for creating the perfect Audio Joy system. Compact in size but a giant performer offering 100 Watts per channel into 4 Ohms or 150 Watts into 2 Ohms. Bridge two channels to run a sub and you have a classic amp for a classic in car hi-fi set up.

  • Supply Only - Price £199.00
  • 4 x 100 Watt RMS
  • 4 x 150 Watt RMS
  • 2 x 300 Watt RMS
  • Four Channel Amplifier Class AB Amplifier
    4 x 150 Watts @ 2 Ohm
    4 x 100 Watts @ 4 Ohm
    2 x 300 Watts @ 4 Ohm bridged
    12 dB High Pass: 25 Hz – 5 kHz
    12 dB Low Pass: 50 Hz – 5 kHz
    Dimensions (LxWxH): 250x 200 x 56 mm
    FEATURES
    Easy adjustment due to Top Control
    Class GH switching for warm sound characteristics,
    large power output at small required space
    Performance amplifier with integrated high-current MOSFET-switch power supply
    Amplifier design for minimal noise
    Reversible safety switch-off with thermal monitoring
    Safety switch-off with DC current to loudspeakers
    Safety switch-off for loudspeaker short-circuit and loudspeaker under impedance
    Softstart remote muting for suppression of switch-on peaks
    High-tech SMD built structure with low coupling conductive wiring
    Palladium-plated 20 mm² power and 10 mm² loudspeaker connection
    Interference-proof certified by European CE-StandardPhase Shifter 0° to 180°
    Signal Noise Ratio more than 90 dBAOperating Voltage 11V – 16V
    Integrated flat fuse in accordance with DIN-standard, replaceable from outside


    Easy adjustment due to Top Control Class GH switching for warm sound characteristics, large power output at small required space (only 2- and 4-Channel Models) Performance amplifier with integrated high-current MOSFET-switch power supplyAmplifier design for minimal noise Reversible safety switch-off with thermal monitoring Safety switch-off with DC current to loudspeakersSafety switch-off for loudspeaker short-circuit and loudspeaker under impedanceSoftstart remote muting for suppression of switch-on peaksHigh-tech SMD built structure with low coupling conductive wiringPalladium-plated 20 mm² power and 10 mm² loudspeaker connectionInterference-proof certified by European CE-StandardPhase Shifter 0° to 180°Signal Noise Ratio more than 90 dBA Operating Voltage 11V – 16VIntegrated flat fuse in accordance with DIN-standard, replaceable from outside

    Output power stereo 4 & 937; 4 x 100 Watt RMS
    Output power stereo 2 & 937; 4 x 150 Watt RMS
    Output power mono 4 & 937; 2 x 300 Watt RMS
    Output power mono 2 & 937; -
    Output power mono 1 & 937; -
    Total Harmonic Distortions THD+N <0,04 %
    Signal / Noise Ratio >95 dBA Bewertung
    Frequency Response -3 dB 25 Hz – 35 kHz
    Input Sensitivity Level In 250 mV - 6 V
    Input Sensitivity High Level In 6V / 10V
    Auto Remote via High Level In Ja
    High-pass / Subsonic 25 Hz - 5 kHz, 12 dB/Okt.
    High-pass / Subsonic - Front -
    High-pass / Subsonic - Rear -
    Low-pass 50 Hz - 5 kHz, 12 dB/Okt.
    Band-pass 25 Hz – 5 kHz, 12 dB/Okt.
    Bass Boost 0 / 3 / 6 dB
    Phaseshifter 0° - 180° stufenlos regelbar
    Remote -
    Suitable Speaker Impedance Stereo [& 937;] 2 x 4 / 2 x 2 möglich
    Suitable Speaker Impedance Mono [& 937;] 1 x 8 / 1 x 4 möglich
    Suitable Speaker Impedance Tri-Mode (Woofer + Satellites) [W] 1 x 4 + 2 x 4 Tri-Mode
    Damping Factor @ 4 & 937; > 200
    Operational voltage 11 V - 16 V DC
    Input Current max. @ 14.4 V 52 A bei 1% THD
    Input Current Remote 15 mA
    Idle current without signal 0,7 A
    Temperature control heatsink 85°C Abschaltung
    Short circuit protection – Overload Sofortabschaltung
    Softstart-Muting on / off 1s Einschaltverzögerung
    Dimensions (W x H x D) 250 x 56 x 200 mm
    weight 2,5 kg

      Send Us Your Review of Rainbow Beat 4 Amplifier

    Contact RAM Mobile about Rainbow Beat 4 Amplifier Installation