JL Audio 12 inch Bass Pack 2
Take out the hassle by letting one of our highly trained technicians install your JL Audio 12 inch Bass Pack 2 for you.
Please note : Additional fitting components are usually required subject to the make and model of your vehicle which we can quote you for prior to the installation.
Contact us on 01924 201884 or email to book your appointment.
Package includes: JL Audio JX250/1 Monoblock Class A/B Subwoofer Amplifier, 250 W x 1 @ 2 Ω / 175 W x 1 @ 4 Ω - 14.4V
This rugged and reliable Class A/B monoblock uses a robust MOSFET power supply design that delivers rock-solid bass performance at a very affordable price.
Targeted specifically for subwoofer applications, the JX250/1 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-200 Hz. It also features a variable bass boost at 45 Hz. with up to 12 dB of boost and an optional remote boost control. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.
JL Audio CP112-W0v3
Enclosed Subwoofer System with Single 12W0v3-4 Subwoofer Driver, Dark Gray Carpet (300 W, 4 Ω) - Ported Enclosure
This powerful slot-ported BassWedge™ subwoofer system delivers awesome output at an unsurpassed value.
The slot-port runs along the bottom of the enclosure and fires on the same plane as the woofer to produce excellent extension and response smoothness. The port mouth is flared to minimize air-flow noises.
The ultra-versatile Bass Wedge™ shape has extended sides so that it can be placed with the woofer firing out or straight down, off the floor of the vehicle. The shape works equally well in forward or rear-firing installations. This gives you plenty of options for tweaking the loading of the enclosure into your vehicle.
This sub-woofer system is shipped wired, loaded and ready to connect via a push-button terminal.
Finish: Dark grey, high-grade automotive carpet with "JL AUDIO" embroidery on the top edge and "Slot-Ported Bass Wedge™" embroidered on the port mouth.
Recommended amplifier power: 75 - 300W
Nominal Impedance: 4 Ω
|@ 4 &||937; 175 W RMS x 1|
|@ 3 &||937; 210 W RMS x 1|
|@ 2 &||937; 250 W RMS x 1|
|Frequency Response 10 Hz - 150 Hz (+0, -1dB)|
|S/N Ratio, referred to highest rated power >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W >63 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 &||937; >160 / 50 Hz|
|Damping Factor @ 2 &||937; >80 / 50 Hz|
|THD+N @ Rated Power <1% @ 2 &||937; per Ch.|
|Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS|
|Input Voltage Range @ High-Level Inputs 2 V - 10 V RMS|
|Min.Copper Power / Ground Wire Gauge 8 AWG wire|
|Fuse Rating 30 A (AFS, AGU or MaxiFuse™)|