JL Audio JX360/2
The JX 360/2 is perfect for those seeking a truly powerful, two-channel Class A/B design. Its robust MOSFET power supply keeps things rock-stable to deliver a very strong 180 watts to each of its two channels into 2 ohms (14.4V, 1% THD). This amplifier can also be bridged to produce 360 W x 1 @ 4 ohms (mono).
Use the JX360/2 in combination with one of the JX monoblocks to build an amazing amplification system at a very affordable price.
The JX360/4 includes a defeatable 12 dB / octave filter, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-200 Hz. Dedicated hi-level inputs are included, in addition to conventional low-level RCA inputs, making it easy to integrate with a variety of OEM and aftermarket head units.
High Quality JL Audio 4 x Channel Amplifier suitable for either a pair of speakers in 2 x Channel mode or a pair of speakers and a subwoofer in 3 x Channel mode, or 4 speakers using all it's available channels.
High-Grade Output Devices and Toroids
- Better reliability than typical competition
- Better power output than typical competition
- Better overall performance
High-Mass Heat Sink
- Improves thermal capacity leading to reduced incidence of shut-down events.
All models feature captured-wire
power & speaker connectors
- Easier installation (no crimping required)
- Better protection from accidental short-circuits
- Cleaner appearance
Complete Signal Processing Sections
- 12dB/oct. High-Pass or Low-Pass Filters with fully variable frequency selection
from 50-500 Hz. Defeatable.
- Pass-Through Preamp Outputs
- High and Low-Level Inputs
Full-Range Class A/B Four-Channel Full-Range Amplifier
4 x 70W @ 4 ohms
4 x 90W @ 2 ohms
2 x 140W @ 8 ohms bridged
2 x 180W @ 4 ohms bridged
|Frequency Response 20 Hz - 20 kHz (+0, -1dB)|
|S/N Ratio, referred to highest rated power >100 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W >77 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 &||937; >60 / 50 Hz|
|Damping Factor @ 2 &||937; >30 / 50 Hz|
|THD+N @ Rated Power <1% @ 2 &||937; per Ch.|
|Input Voltage Range @ RCA Inputs 200 mV - 4 V RMS|
|Input Voltage Range @ High-Level Inputs 2 V - 10 V RMS|
|Min.Copper Power / Ground Wire Gauge 4 AWG wire|
|Fuse Rating 50 A (AFS, AGU or MaxiFuse™)|