Sigma S32 Thatcham 2 to 1 Car Alarm

from £299.00

Sigma Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection •Switched from vehicle's existing original remote central locking controls •Supplied with self powered siren, and tri-coloured status LED •The system has negative lock/unlock outputs to switch negative controlled CDL systems •Single immobilisation circuit •Key theft protection facility - only with the optional keypad •Auxiliary siren, armed accessory, interior lamp illumination and headlamp illumination outputs •Sophisticated programming and diagnostic facility via the optional keypad

**Please note, all alarm systems must be installed by a qualified technician. All alarms are sold on this basis and no fitting instructions are implied or given**

  • Including Workshop Fitting - Price from £299.00
    Including Location Fitting - Price from £349.00
  • Thatcham 2 to 1 Car Alarm
  • Take out the hassle by letting one of our highly trained technicians install your Sigma S32 Thatcham 2 to 1 Car Alarm for you.

    Please note : Additional fitting components are usually required subject to the make and model of your vehicle which we can quote you for prior to the installation.

    Contact us on 01924 201884 or email to book your appointment.

    Thatcham Upgrade Alarm Sigma S32
    Utilising the original equipment radio keys, providing perimeter and ultrasonic interior protection
    Thatcham Category 2 to 1 upgrade alarm system, providing perimeter and ultrasonic interior protection
    Switched from vehicle’s existing OE remote controls
    Supplied with self powered siren, and tri-coloured status LED
    The system has negative lock/unlock outputs to switch negative controlled CDL systems
    Single immobilisation circuit
    Key theft protection facility – only with the optional keypad
    Auxiliary siren, armed accessory, interior lamp illumination and headlamp illumination outputs
    Sophisticated programming and diagnostic facility via the keypad
    Security Features
    Switches securely from the vehicle’s existing OE remote
    Perimeter protection circuit for boot and bonnet (negative input)
    Perimeter protection circuit for doors (positive or negative input)
    Closed loop protection circuit (looped wire to protect accessories, trailers, bike racks etc)
    Ignition detection circuit
    Ultrasonic interior protection (base sensitivity adjustable, length of disturbance adjustable, and automatically adjusts if any movement is detected during the threshold time)
    Single immobilisation circuit (18 amp continuous/30 amp max)
    Manual arm, using the vehicle’s existing OE remote (or programmable auto arm, which automatically arms the system 60 seconds after the last door is shut – adjustable between 1 and 99 seconds. Auto arm can also be programmed to lock the vehicle if required)
    Auto re-arm can be programmed to re-arm the system if a door is not opened within 60 seconds of disarming the system -adjustable between 1 and 99 seconds. Auto re-arm also re-locks the vehicle
    Key theft protection feature can be turned on to prevent the OE radio keys automatically de-activating the immobilisation when the alarm system is disarmed. In this mode the system’s PIN must also be entered into the keypad before the vehicle can be started. This prevents theft of a vehicle even with the owner’s keys
    Last trigger identification via the dashboard LED and a record of the elapsed time since the last trigger, can be recalled using the keypad
    The total trigger count memory for each individual circuit since the system was installed or the memory re-set is also stored in the system’s memory
    Additional plug in single stage sensor socket (see optional accessories)
    Additional plug in dual stage sensor socket and siren pre-warn facility (see optional accessories)
    Secure data linked, self powered siren included
    Convenience Features
    Negative door locking/unlocking control (with the ability to adjust the pulse length, to provide a double pulse or adjust the delay period)
    Armed output (negative 200mA max )
    Additional siren/pager output (negative 200mA max)
    Interior lamp illumination output (negative 200mA max)
    Headlamp illumination output (negative 200mA max)
    Secure ignition PIN override
    Secure PIN override using the keypad
    Silent arm and disarm (audible bleeps can be programmed back on, however this will breach current legislation)
    The last circuit to trigger can be excluded using the keypad
    The vehicle’s battery voltage can be checked using the keypad
    The sensors are excludable using the keypad or repeated arming
    Personal Safety Features
    Auto lock can be programmed to lock the vehicle at the start of a journey when the ignition is turned on, and then unlock when the ignition is turned off. This can be excluded on individual occasions

    Optional Accessories
    Single Stage Sensors
    T-TS1 Tilt sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
    AS610 Single stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
    AS620 Single zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
    Dual Stage Sensors
    AS625 Dual zone microwave. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
    T2SS Dual stage shock sensor. Plug in sensor. Only for use in addition to the ultrasonic interior sensors
    Other
    2012054 RF pager

      Send Us Your Review of Sigma S32 Thatcham 2 to 1 Car Alarm

    Contact RAM Mobile about Sigma S32 Thatcham 2 to 1 Car Alarm Installation