Toad Car Alarm Ai606T2 Car Security Installation

from £349.00

Our cheapest price ever for this Toad Ai606 Alarm. Thatcham Category 1 Alarm and Immobiliser system, including ultrasonic interior protection, great value car security installation.

  • Including Workshop Fitting - Price from £349.00
    Including Location Fitting - Price from £449.00
  • Toad Car Alarm
  • Thatcham Category 1 Alarm and Immobiliser
  • Insurance Approved
  • Pin Code Override Facility
  • Take out the hassle by letting one of our highly trained technicians install your Toad Car Alarm Ai606T2 Car Security Installation for you.

    Please note : Additional fitting components are usually required subject to the make and model of your vehicle which we can quote you for prior to the installation.

    Contact us on 01924 201884 or email to book your appointment.

    Toad Car Alarm Ai606 Thatcham Category 1 Alarm and Immobiliser system, providing perimeter and ultrasonic interior protection
    Supplied with 2 x four button radio keys, self powered siren and a tri-coloured status LED.
    The system has full, in-built, CDL control to power/switch a vehicle’s CDL system.
    Dual immobilisation circuits
    Auxiliary siren, armed accessory, total closure,
    interior lamp illumination, headlamp illumination, 2-stage unlock, boot release
    Last trigger diagnostics via status LED

    Security Features
    2 x four button radio keys (programmable, water
    and shock resistant with random 66-bit encryption to prevent scanning and code
    grabbing. Lost or stolen radio keys can be programmed out)
    Perimeter protection circuit for boot and bonnet
    (negative input)
    Perimeter protection circuit for doors (positive
    or negative input)
    Ultrasonic interior protection, manually
    2 x immobilisation circuits, passively armed (18
    amp continuous/30 amp max)
    Manual arm using the radio key (or programmable
    auto arm, which automatically arms the system 60 seconds after the last door is
    shut. Auto arm will not lock the vehicle’s doors)
    Auto re-arm can be programmed to re-arm the
    system if a door is not opened within 60 seconds of disarming the system. Auto
    re-arm can also be programmed to re-lock the vehicle’s doors
    Last trigger identification via the dashboard
    LED, if the ignition is switched on upon disarming the system after an alarm
    condition has occurred
    Additional plug in single stage sensor socket
    (see optional accessories)
    Additional plug in dual stage sensor socket and
    siren pre-warn facility (see optional accessories)
    Secure data linked, self powered siren Included

    Convenience Features
    Full central door locking/unlocking control, with
    a two stage unlock facility
    Armed output (negative 500mA max)
    Additional Siren/Pager output (negative 300mA
    Manual comfort closure (on holding down button
    one on the radio key when arming. The output is provided through the standard
    lock command wire)
    Total closure output (on holding down button four
    on the radio key for three seconds or automatically on arming. A preset timed
    negative output of 500mA will be provided
    Boot release output (on holding down button three
    on the radio key for three seconds, negative output of 500mA will be provided.
    If the alarm system is in an armed state the ultrasonic sensors and boot trigger
    circuit will also be disabled, and will not be re-enabled until 20 seconds after
    closing the boot on the vehicle)
    Manual closure output (on holding down buttons
    three and four on the radio key a negative output of 500mA, will be output until
    both buttons are released
    Interior lamp illumination output on disarm
    (negative door trigger wire only)
    Secure ignition PIN override
    Silent arm and disarm (audible bleeps can be
    programmed back on, however this will breach current legislation)
    Silent arm and disarm for one time only if
    audible bleeps are programmed on
    Sensors excludable using the radio key

    Personal Safety Features
    Auto lock can be programmed to lock the vehicle
    at the start of a journey when the ignition is turned on, and then unlock when
    the ignition is turned off. This feature can be permanently excluded by your
    installer if required
    The panic feature allows the siren to sound and
    the hazards to flash, if button one on the radio key is held down for three

    TOAD Ai606T2Box Contents
    Ai606T2 alarm ECU
    Metal alarm ECU
    Fixing screws
    Ai606T2 alarm installation wiring loom
    data linked, self powered siren
    Siren lead with plug with bonnet switch
    Siren bracket and fixings
    Tri-colour LED and loom
    Two ultrasonic
    Two radio keys
    Operating instructions & PIN
    Certificate of installation
    Two Toad window stickers

    Installation Options:
    Our fitters are able to install Toad Car Alarms and Vehicle Security products at either your home or place of work (subject to conditions) and we cover most towns and cities including Leeds, Sheffield, Doncaster, Bradford and of course Wakefield.
    However we do strongly recommend that our "Mr Toad" installer carries out the installation of a security device in our workshops here in Wakefield operate from a more controlled, secure environment, rather than on a driveway or at the side of the road. For this reason we also offer FREE collection and delivery, and a Three Year product Warranty.

    **Please note, all alarm systems must be installed by a qualified technician. All alarms are sold on this basis and no fitting instructions are implied or given**

      Send Us Your Review of Toad Car Alarm Ai606T2 Car Security Installation

    Contact RAM Mobile about Toad Car Alarm Ai606T2 Car Security Installation Installation